Filter
Top Products
Operation 43
i. These buttons function the same as the ones on the OSD menus or
remote control. See "2. PICTURE menu" on page 64 and "Projector" on
page 8 for details.
ii. To switch between input signals, click on your desired signal.
iii. The software is available in multiple languages.
• The Menu button can also be used to go back to previous OSD menus, exit and save menu
settings.
• The source list varies according to the connectors available on the projector.
• When you use the projector control panel or remote control to change the OSD menu
settings, it may take a while for the web browser to synchronize these changes with the
projector.
The tools page allows you to manage the projector, configure the LAN control settings and
secure access of remote network operation on this projector.
iv. This section is only used with the Crestron Control System. Please contact
Crestron or refer to its user manual for setup information.
v. You can name the projector, keep track of its location and the person in
charge of it.
vi. You can adjust the LAN Control Settings.
vii. Once set, access to the remote network operation on this projector has
been password-protected.
viii.Once set, access to the tools page has been password-protected.
• To prevent errors, only input the English alphabet and digits on the tools page.
• After making the adjustments, press the Send button and the data will be saved for the
projector.
ix. Press Exit to go back to the remote network operation page.
x. The software is available in multiple languages, though only English
letters and digits are allowed to be input.
iv vii
vi
v
viii
ix
x