Filter
Top Products
16ViewSonic PJ256D
Using the Remote Control
Power
4
Refer to the “Power On/Off the Projector” section on pages
11-12.
Source
4
Press “Source” to choose RGB, Component-p, Component-i,
S-Video, Composite Video and HDTV sources.
Auto
4
Automatically synchronizes the projector to the input source.
Keystone
4
Adjusts image distortion caused by tilting the projector (±8
degrees). Press “Keystone” button, then use
to adjust the
setting.
Hide
4
“Hide” immediately turns the screen black. Press “Hide” again
to restore the displayed image.
Laser Button
4
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
Freeze
4
Press “Freeze” to pause the screen image.
Mouse/Mouse Right Click/Mouse Left Click (*)
4
These functions are the same as a mouse of PC or Mac.
Four Directional Select Keys
4
Use to select items or make adjustments to
your selection.
Enter
4
Confirm your selection of items.
Menu
4
Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
Remark : “
*
” this is
computer mode only.
And these functions
are only available
when the projector is
connected to a
computer via an USB
cable.