ViewSonic PJ400 Projector User Manual


 
ViewSonic PJ400
21
Using the partial magnify feature
1. Press the ON button of MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen
(although the indication will disappear after several seconds
with no operation), and the projector will enter the MAGNIFY
mode
2. Use the cursor buttons / to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode, the use
the cursor buttons /// to move the area. And to finalize the zoom area, press
the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF button
of MAGNIFY on the remote control.
The projector automatically exits the MAGNIFY mode when the input signal
changes, or when an operation of changing the display condition (automatic
adjustment, etc.) is executed.
Although in the MAGNIFY mode, the keystone distortion condition may vary, it
will be restored when the projector exit the MAGNIFY mode.
Freezing the screen
1. Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen, and the
projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
The projector automatically exits the FREEZE mode when the input signal
changes, or when one of the projector’s buttons or the remote control buttons of
STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION and MENU is pressed.
If the projector continues projecting a still image for long time, the LCD panel
might possibly be printed. Do not leave the projector in FREEZE mode for too long.
Temporarily blanking the screen
1. Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the item BLANK of section
SCREEN menu (35).
To remove the blank screen and return to the input signal
screen, press the BLANK button again.
The projector automatically returns to the input signal screen when the input signal
changes, or when one of the projector’s buttons or the remote control buttons are
pressed.