Filter
Top Products
ViewSonic PJ400
36
SCREEN menu (continued)
Item Description
START UP Using the buttons ▲/▼ switches the mode for the start up screen.
The start up screen is the screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ORIGINAL TURN OFF
════=══=══=══=══=═══
MyScreen is the screen you can register a desired screen. ORIGINAL
screen is the existing standard screen. When the TURN OFF is
selected, the BLUE screen is used.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,
it will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen below. About
the BLUE, BLACK and BLANK screens, please refer to the item
BLANK. (35)
MyScreen This item functions for capturing the MyScreen of the blank screen
and the start up screen. Please execute displaying the input including
the picture you want to capture.
1. Choosing this item displays a dialog titled
“MyScreen”. It will ask you if you start
capturing the picture from the current screen.
Please wait for the target picture to be
displayed.
2. Press the ENTER button when the picture
is display. The picture will freeze and the
frame for capturing appears.
To stop performing, press the RESET or
ESC button.
3. Using the buttons ◄/►/▲/▼ adjust the frame position. Please
move the frame to the position of the picture which you want to use.
To start registration, press the ENTER
button.
To restore the screen and return to the previous dialog, press the
RESET or ESC button.
Registration takes several minutes. When the registration is
completed, the registered screen and the message “MyScreen
registration is finished.” are displayed for several seconds. If the
registration failed, the message “A capturing error has occurred.
Please try again.” is displayed.