ViewSonic PJ551 Projector User Manual


 
11
ViewSonic PJ501/PJ551
AUTO
(remote control)
Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H.
POSITION), Vertical Position, (V. POSITION), Clock Phase (H. PHASE), and Horizontal Size
(H. SIZE), are automatically adjusted.
Before using the AUTO feature, be sure to maximize the window of the application
displayed on-screen.
Automatic Adjustment (for Video Input): Press the AUTO button. A signal type
appropriate for the input signal is selected automatically. This is valid only when AUTO is set
for VIDEO on the menu.
This operation requires approximately ten seconds. It may not function correctly with some
input signals.
BLANK ON/OFF
(remote control)
Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in
this mode. Access the on-screen menu to set the screen color for blank mode.
MENU (*)
(projector control panel
and remote control)
Display/Clear Menu: Press the MENU button.
Select Menu: Press the / buttons to select the menu (MAIN, PICTURE-1, PICTURE-2,
INPUT, SCREEN, OPTION), and press the button or the ENTER button (on the remote
control) to proceed.
Select Item: Press the / buttons to select the item you want to operate, and press the
button or the ENTER button (on the remote control) to proceed.
Select Menu Type (for adjustment with numerical value): After fixing the item, press the
button or ENTER button (on the remote control) to turn to the single type menu. To return
to the usual menu, press the button or ESC button.
Operate: Press the / buttons according to the menu.
The menu display is terminated automatically after approximately 10 seconds of inactivity.
SEARCH
(remote control)
Search Signal: Press the SEARCH button on the remote control to search for other signal
inputs with following command : When a signal is detected, the projector displays the
detected signal picture. If no signal is detected, it turns back to the initial signal input.
Example : If S-VIDEO was the last input used before powering off, then S-VIDEO will be the
selected input when the projector is powered back on.
RGB VIDEO S-VIDEO COMPONENT VIDEO (RGB)
ASPECT
(Aspect Ratio)
(remote control)
Select Aspect (Ratio): Press the ASPECT button on the remote control to select the aspect
ratio.
For RGB Input or Hi-Vision 1125i/750p of COMPONENT VIDEO Input:
4:3 16:9
For VIDEO Input, S-VIDEO Input or 525i/525p/625i/625p of COMPONENT VIDEO Input:
4:3 16:9 SMALL (4:3)
ESC (Escape)
(remote control)
Escape: Press the ESC button on the remote control to return to the previous menu from a
selected sub-menu.
ENTER
(remote control)
Escape: Press the ENTER button on the remote control activate the adjustment screen for a
selected menu option.
NOTE: Pressing the button performs the same function.
Table 3: Basic Operation (Continued)
Item Description