Filter
Top Products
ViewSonic PJ501/PJ551
12
MAIN Menu
To access the MAIN Menu, press the MENU button on the remote control. This projector has 6
menus: MAIN, PICTURE-1, PICTURE-2, INPUT, SCREEN and OPTION. To select a menu use the
/
buttons, then press the button or the ENTER button to select a menu item.
The MAIN Menu has seven (7) items as shown in the Table 4.
Please select the item you want to operate with the
/
buttons and
press the button or the ENTER button to start operating. Then you
can operate corresponding to the following table.
Table 4: MAIN Menu
Item Actions/Description
BRIGHT
(Brightness)
Lighter Darker
CONTRAST
Stronger Weaker
ASPECT
(Aspect Ratio)
Select Aspect Ratio
Select ASPECT from the MAIN menu and then do the following:
For RGB Input or Hi-Vision 1035i/1125i/750p of COMPONENT VIDEO Input , press the
/
button to select one of these options:
•4:3
•16:9
For VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input, press the
/
button to select one of these options:
•4:3
•16:9
• SMALL (The SMALL option may not work properly with some input signals.)
NOTE: You can also press the ASPECT button on the remote control to select the Aspect Ratio.
PICT. POSIT.
(Picture Position)
Select Picture Position (for 16:9/SMALL Picture)
Press the
/
button to select one of these options:
•TOP
•CENTER
•BOTTOM
GAMMA Select Gamma Mode
Press the
/
button to select one of these options:
•NORMAL
•CINEMA
• DYNAMIC
MIRROR Select Mirror Status:
Press the
/
button to select one of these options:
•NORMAL
• H:INVERT (Horizontally Inverted image)
• V:INVERT (Vertically Inverted image)
•H&V:INVERT
(Horizontally and Vertically Inverted image)