Filter
Top Products
ViewSonic Wireless Media Gateway 15
Step 3: Configure the Gateway
You only need to configure the Gateway once on any computer
that is already set up using the Web-based utility screens shown on
the next few pages. Default settings in the table on the right may be
helpful during the configuration process.
Open your web browser. In the Address field, enter
http://192.168.1.1 and press Enter. A login window appears
like the one shown on the right.
Login
User name: leave blank.
Password: enter the default password admin in all lowercase
letters. Later on, we recommend changing the default to your
own password for added security using the Advanced Settings
tab.
Click OK. The Primary Setup screen appears as shown in the
next step.
Basic Settings Default
Internet Configuration Type Automatic
Configuration-DHCP
Wireless Media Gateway IP
Address
192.168.1.1
Wireless Media Gateway
Subnet Mask
255.255.255.0
Gateway Password admin (lowercase)
DHCP Settings
DHCP Server Enable
DHCP Starting IP Address 192.168.1.10
Number of DHCP Client
Users
50
2.4GHz Wireless Setting
SSID viewsonic
Channel 1
WEP (Encryption) Disable
admin
ATTENTION! Notice forward slashes (//) are
used here! In another place in this guide, you
will be asked to use back slashes (\\).