Filter
Top Products
ViewSonic DSM3210
16
ENGLISH
Basic Operation
To operate your Digital Signage Multimedia, you may use the Digital Signage Multimedia
remote control or top panel buttons to select input source, change channels, or adjust
volume.
Turning on the Digital Signage Multimedia
Before using the Digital Signage Multimedia:
1. Connect external equipment properly.
2. Insert the power plug, and the power LED indicator will light amber.
Power On/Off
To turn the Digital Signage Multimedia on/off:
Press the POWER button under the Digital Signage Multimedia, or press the
POWER button on your remote control to turn on/off the Digital Signage Multimedia.
The power LED indicator lights blue when the Digital Signage Multimedia is on.
Selecting input source
To select the required input source:
Press the INPUT button on the remote control. Use ▲▼ to select the required input
source between TV, AV, S-Video, YPbPr, VGA, and HDMI.
To confirm the selection, press
ENTER.
Volume adjusting
Press VOL+/- to adjust the volume.
To turn off the volume, press
MUTE.
If you want to restore volume, press MUTE again, or press VOL+/- directly.
INFO
To display the current information of the Digital Signage Multimedia:
Press INFO, and the current state will be displayed on the screen. (It shows all or
some of the information about Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in.)