Filter
Top Products
ViewSonic 14 DVP5
File management with a PC
Follow the procedures below to manage les in either built-in memory or memory
card by using a PC or Notebook.
1
Make sure the projector is powered off.
2
Connect one end of the bundled USB cable to the USB port of the projector and
the other end to a powered PC.
3
Please switch on the projector and wait until the picture below appears on the
projection screen. Press OK to enter Disk mode.
4
Two removable disks will appear in “My Computer”.
Disk Name Description
Removable Disk for storing your recordings.
DV Projector
for storing AMC, E-manual and USB Driver
PC can only recognize one storage medium each time (If the projector with SD Card
inside, the computer will detect the SD Card. If you want to detect the internal memory,
you have to remove the SD Card.)
Do not switch the storage medium during operation.
When connecting the projector to PC USB port without turning on the projector, the PC
starts charging the battery inside the projector. To read the les in the memory, press
the Power button.
Disk
USB Projection
For select model only. Please refer to the package printing for detailed
specication.