Filter
Top Products
27
White Intensity
Increase the brightness of white areas.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look
brighter.
Aspect Ratio
Select how the picture fits on the screen:
• Auto: Scales an image proportionally to fit the projector's native resolution in its
horizontal or vertical width. You want to make most use of the screen without
altering the source image’s aspect ratio.
• 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3
aspect ratio.
• 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9
aspect ratio.
• Anamorphic: Minimizes the aspect ratio distortion by maintaining close to the
original aspect ratio in the center of the image and distributing the majority of
distortion at the edges of the displayed image.
Dynamic Mode
Choose “On” to dim the projector lamp which will automatically detect the brightness
level of the content and reduce lamp power consumption (up to 70 percent). Choose
“Off” to turn off Dynamic Mode.
Note
• When Dynamic Mode is “On”, Eco Mode will be gray out.
Keystone
Manually correct distorted images resulting from an angled projection.
Press Keystone / on the projector or remote control to display the Keystone
correction page.
Press to correct keystone at the top of the image.
Press to correct keystone at the bottom of the image.
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
• 3D Sync: When you discover the inversion of the image depth, enable this function
to correct the problem.
• 3D Format: Use this function to choose an appropriate 3D format if the projector
cannot recognize the 3D format.
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects
the signal for 3D Sync information and once detected, it projects images in 3D
format automatically. In other cases, you may need to manually select a 3D Sync
format for the projector to project 3D images correctly.
Note
• 3D Format will be available when 3D Sync is “On”.