ViewSonic VS14969 Projector User Manual


 
30
Allows the projector to turn off automatically if no input signal is detected after a set
period of time.
Sleep Timer
No matter whether the projector detect signal or not, the projector will turn off
automatically when the countdown has finished.
Standby Setting
Green Mode: Enable this function when power consumption is under 0.5W.
Note
When Green Mode is “On”, Active VGA Out and Active audio out will be gray out.
Active VGA Out: Set whether the VGA OUT function works when the projector is in
standby (powered off but connected to AC power).
Active audio out: Set whether the audio out function works when the projector is in
standby (powered off but connected to AC power).
Quick Power Off
On: The projector will directly shut down without cooling procedure.
Off: The projector will shut down following normal cooling procedure.
Smart Restart: Selecting On enables you to restart the projector immediately within
3 minutes after turning it off. After 3 minutes, if the projector is not turned on again,
it will directly enter the standby mode.
Option
Closed Caption
Enable or disable closed captions by selecting CC1 (closed caption1, the most
common channel), CC2, CC3, CC4, T1, T2 or OFF.
Password
Set, change or delete the password. When the password function is added, image
projection will require to input the preset password when turning on the projector.
Presentation Timer
Remind the presenter to finish the presentation within a certain time frame.
High Altitude
Use this function to allow the fans operates at full speed continuously to achieve
proper high altitude cooling of the projector.
Lamp Setting
Allow you to enter the Lamp Setting menu.
Lamp Hours: Display the lamp’s elapsed operating time (in hours).
Lamp Hours Reset: Reset the lamp Hour to 0 hours.
Eco Mode: Use this function to dim the projector lamp light output which will lower
power consumption and increase lamp life.
Dynamic Eco Timer (RC): Sets the timer of triggering Dynamic Eco function. The
projector lamp will start dimming when the timer period has finished.