Filter
Top Products
15
2-3-1 Windows XP IP address setup:
Click ‘Start’ from windows toolbar
locate at bottom, open control panel,
then select Network and Internet
Connections, click Network
Connections, and then double-click
Local Area Connection, Local
Area Connection Status window
will appear, and then click
‘Properties’
Select ‘Use the following IP
address’, then input the following
settings in respective field:
IP address: 192.168.0.x (where x is
an integer greater or less than 200, if
there’s more than one computer
need to use this WPG on the same
network, each computer should use
an unique number)
Subnet Mask: 255.255.255.0
Click ‘OK’ when finish.
WPG-350ViewSonic