Visioneer 1270 Fax Machine User Manual


 
34
CHAPTER FIVE
Press
Resolution
(before you send the fax)to select the resolution for the
document you’re sending.
Standard — suitable for most typed documents.
Fine — good for small print; transmits a little slower than standard
resolution.
Super Fine — good for small print or artwork; transmits slower than fine
resolution.
Photo — use when document has varying shades of gray; slowest
transmission time.
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric.
Make sure documents written with ink are completely dry.
Contrast Setting
If your document is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light document. Use S.DARK to send a
very dark document.
1
Insert the document, face down, in the feeder.
2
Press
Function
,
1
,
4
.
3
Use or to select AUTO, S.LIGHT, or S.DARK.
4
When the screen displays your selection, press
Set
.
5
Press
Stop
to exit.
6
Enter a fax number and press
Start
to send a fax — OR — Press
Copy
to
make a copy.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing, and fax receiving tones
before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone
OR — Press
Hook
and listen for a dial tone.
3
Enter the fax number you want to call (you can enter the digits using the
keypad, or you can enter a One Touch or Speed Dial number or you can
call from the Tel-index).
See
One-Touch
Dialing
p. 23