Filter
Top Products
AMD HD5450 / AMD HD4670 /
AMD HD4350 / AMD HD3450
Copyright © 2011 Jaton Corporation, USA 19
4. Remove any existing graphics cards from the computer. Some
graphics cards can get hot while operating. Wait approximately
five minutes after turning off the computer before touching the
card.
5. Locate the appropriate bus slot on the motherboard. If
necessary, remove the corresponding back panel cover.
6. Align the new graphics card in the bus slot and press firmly
until the card is fully seated.
7. Fasten the graphics card securely to the back panel.
8. Make sure the cables are not interfering with anything inside
the computer (for example, a cooling fan) and then replace the
computer cover.
9. Reconnect any cables you have disconnected and plug in the
computer power cord.
10. Turn on the monitor and then the computer.
The computer should start normally and the software must be
installed next.