Filter
Top Products
DLP Projector—User’s Manual
Rear view
12
103
456789
11
12
13
14
1516
ITEM LABEL DESCRIPTION SEE PAGE
1.
AC IN Connect the POWER cable
11
2.
VGA IN Connect the RGB cable from a computer
3.
VGA IN Connect the RGB cable from a computer
4.
(USB)
Connect the USB cable from a computer
5.
VGA OUT Connect the RGB cable to a display
6.
RS-232C Connect RS-232 serial port cable for remote control
7.
DP Connect a DISPLAYPORT CABLE from a DISPLAYPORT device
8.
HDMI Connect the HDMI cable from a HDMI device
9.
RJ45 Connect a LAN cable from Ethernet
10.
Kensington Lock
Secure to permanent object with a Kensington® Lock
system
49
11.
VIDEO IN Connect the COMPOSITE cable from a video device
12.
AUDIO IN (L and R) Connect the AUDIO cable from a audio device
13.
S-VIDEO Connect the S-VIDEO cable from a video device
14.
AUDIO IN Connect an AUDIO cable from the audio device
15.
AUDIO OUT Connect an AUDIO cable to audio amplifier
16.
DC 12V TRIGGER
When connected to the screen through a commercially available cable,
the screen deploys automatically on start up of the projector. The screen
retracts when the projector is powered off (see notes below).
Note:
To use this feature, you must plug in the connector before turn on/off the projector.
Screen controllers are supplied and supported by screen manufacturers.
Do not use this jack for anything other than intended use.
— 4 —