Filter
Top Products
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
19
While checking “Use this IP whenever system boots”, a dialog window may pop out to ask for “Server
FTP Port” and “Root Password” because they are already changed to other than default settings. If the
settings are lost, restore default settings and use installer to install again.
Once installation is complete, administrators should follow the actions in the "First access to
VisualServer" section for necessary checks and configurations. Experienced administrators may use the
customized config.ini script file to perform a quick setup via FTP. Detailed procedure can be found on the
section “One-shot fast configuration via FTP”.
To allow users to connect to NetworKam through an easily memorized name, the administrators must first
configure the name server in his network. Here is an example: When the administrator wants to set up
NetworKam with a fixed IP address and let users connect to NetworKam by typing a name instead of IP
address, the administrator may reserve the IP from DHCP service and assign it with name in the domain
name service. During NetworKam installation, assign the ready IP address. After successful installation,
users may access the NetworKam by the given name.