Filter
Top Products
5 DIP SWITCH FOR FUNCTION SELECTION ON CCU-11B
The DIP switches on the CCU-11B allow selection of the following functions;
Switches
Functions
DIP-SW "ON "Position DIP-SW "OFF "Position
Mini-Jumper for Battery
Battery "ON"
Position
Battery "OFF"
Position
OFF
OFF
Remote Control (Door)
Continues Calling Tone
OFF
OFF
Priority & Executive Priority
Press to Talk Control
Time Interval Adjustment
before All Call Paging Pre-
announce Tone
Calling Tone Duration
Call Transfer
All Call Paging & Response
Make/Break Relay Output
Activate
Activate
Activate
1 ~ 2
sec.
Short (0.7 sec)
Activate
Activate
One shot Relay Output
(4
sec.)
Not Activate
Not Activate
Not Activate
None
Long (1.3 sec)
Not Activate
Not Activate
Programming Switch
Station No. 11 is
"Programming station'
Station No. 11 is a
normal station
PROG
sw
SW-B (SW1)
SW-A (SW2)
1: BATT. OFF
2: BATT. ON
OFF
ON
A. All Call Paging and Response
B. Call Holding/Call Transfer
C. Calling Tone Duration
D. Time Interval Adjustment before All Call Paging
E. PTT Control
F. Priority and Executive Priority
G. Remote Control
H. Continuous Calling Tone
— 5 —