Filter
Top Products
23
EFFECTS
The AD15VT, AD30VT,AD50VT & AD100VT provide eleven of the most popular effects
(some effects actually combine two effects). you can adjust the SPEED parameter of
modulation effects or the TIME parameter of delay/reverb effects simply by pressing the
TAP switch twice. In addition to using the EDIT 1 knob to adjust the most important
parameters, you can make more detailed adjustments by holding down the TAP button or
BYPASS button while turning the EDIT 1 knob.
NOTE: In order to adjust the effect parameters, Effect Bypass must be off (BYPASS LED
dark). If you hold down the TAP switch and turn the EDIT 1 knob when bypass is on
(BYPASS LED lit), you’ll be adjusting the noise reduction — not the effect parameter.
HINT: If don’t want to use an effect in a channel program, select either DELAY or
REVERB as the effect type, and turn the EDIT 1 knob all the way to the left. This will set
the DELAY LEVEL or REVERB LEVEL to the minimum setting.
AUTO WAH
This models an auto-wah; a device that creates an automatic “wah” effect that varies with
your picking dynamics (i.e., how hard or soft you hit the strings) — a quirky, but useful
effect.
TYPE TAP EDIT 1
EDIT 2
[TAP+EDIT 1]
EDIT 3
[BYPASS+EDIT 1]
AUTO WAH WAH SENS WAH ATTACK WAH POLARITY
COMP COMP SENS COMP ATTACK
COMP+PHASER PHASER SPEED COMP SENS PHASER SPEED PHASER RESONANCE
COMP+CHORUS CHORUS SPEED COMP SENS CHORUS SPEED CHORUS MIX
CHORUS+DELAY DELAY TIME DELAY LEVEL DELAY TIME CHORUS MIX
CHORUS+REVERB CHORUS SPEED REVERB LEVEL CHORUS SPEED CHORUS MIX
FLANGER+REVERB FLANGER SPEED REVERB LEVEL FLANGER SPEED
FLANGER RESONANCE
TREMOLO+REVERB TREMOLO SPEED REVERB LEVEL TREMOLO SPEED TREMOLO DEPTH
ROTARY+REVERB ROTARY SPEED REVERB LEVEL ROTARY SPEED ROTARY SENS
DELAY DELAY TIME DELAY LEVEL DELAY TIME DELAY FEEDBACK
REVERB REVERB TIME REVERB LEVEL REVERB TIME REVERB HIDAMP
EDIT1 “SENS” Adjusts the sensitivity of the effect in response to the
volume of your guitar.
EDIT2
[TAP+EDIT 1]
“ATTACK” Adjusts the response speed of the auto wah.
EDIT3
[BYPASS+EDIT 1]
“POLARITY” Adjusts the direction in which the effect operates.