Filter
Top Products
Each input can be configured as eitherenabled or disabled:
Enabled: If you intend to use an input, configure it
OS
enabled. This allows the input to
function normally.
Disabled: If you do not intend to use an input, configure it as disabled. When an input is
disabled, it will not be visible when using the input key on the remote control to select an
input for listening. This saves you from having to scroll past unused inputs when selecting
your source.
In addition, if an input is configured as disobled, the Configure Clocklink and Configure
Name Screens for that input are not available when scrolling through the configuration
screens.
There is no sonic advantage to disabling the unused inputs. The
Wadia
27
i
and the original
Wadia 27 ore equipped with “sleeping inputs.” All circuitry associated with individual inputs is
shut down whenever that input is not selected, minimizing noise.
To configure a source as either enabled or disabled, press the Enter key repeatedly until the
Configuration Screen for that input appears. Below, we see the Configure Enable/Disable
Screen for Input 1, which is currently configured as Enabled.
Using the Volume Up or Volume Down key, select between Enabled and Disabled.
FACTORY SETTING
When shipped from the factory, all of the
Wadia
27i inputs are configured as enabled.