Filter
Top Products
17
Setup & Configuration
—UPC-A (cont.)
Begin
Supplement Digits
Truncate Leading Zero
Exit
NOTE: For help in configuring these settings, consult the programming
steps on page 5.
The first six digits of the UPC-A bar code are assigned from the Uniform Code Council
(UCC).The next five digits are assigned by the manufacturer, and the final digit is a modulo
10 check digit.The nominal height for the UPC-A bar code is one inch.The reduced size is
80% of the nominal size.
*Default
Option Alpha/Numeric Entry
(Back Flap)
None 00*
2 digits 01
5 digits 02
2 / 5 digits 03
or None
Disable 00*
Enable 01