Filter
Top Products
RS-232 Interface
6-5
RS-232 Default Parameters
Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the
appropriate bar code(s) provided in the Parameter Descriptions section beginning on page
6-6.
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Table 6-1. RS-232 Host Default Table
Parameter Default Page Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232 6-9
Baud Rate 9600 6-11
Parity None 6-13
Check Receive Errors Enable 6-13
Stop Bit Select 1 Stop Bit 6-14
Data Bits 8-Bit 6-14
Hardware Handshaking None 6-16
Software Handshaking None 6-18
Host Serial Response Time-out Minimum: 2 sec 6-20
RTS Line State Host: Low RTS 6-21
Beep on <BEL> Disable 6-22
Intercharacter Delay Minimum: 0 msec 6-23
Nixdorf Beep/LED Options Normal Operation 6-24
Ignore Unknown Characters Send Bar Code 6-25