Filter
Top Products
Chapter 4: Configure the Network Interfaces
46 WatchGuard Firebox SOHO 6.1
Once you have upgraded to the SOHO 6 to activate this features,
follow these instructions to configure Dual ISP Port:
1 Connect one end of a straight-through Ethernet cable into the
OPT port, and connect the other end into the source of the
secondary or fail-over External network connection. This can
be either a DSL/cable modem or Hub.
2With your Web browser, go to the System Status page using the
Trusted IP address of the SOHO 6.
For example, if using the default IP address, go to: http://192.168.111.1
3 From the navigation bar on the left side, select
Network => Dual ISP.
The Dual ISP Options page appears.
4 Select the Enable Dual ISP checkbox.
5 Enter the IP address for the External Interface.
6 Enter the IP address for the Optional or Failover Interface.
7 Enter how many seconds between pings.
8 Enter how long (in seconds) to wait for a reply.