Filter
Top Products
2
5) Slide the burner assembly out from under the guide
screw and washer(1) in the corners of the cooking box.
Do not loosen screws. The screws are only guides.
(1)
6) Lift and twist the burner assembly slightly, to separate
the Crossover
®
tube(1) from the burners. Remove the
burners from the cooking box(2).
(1)
3 burner
2 burner
(2)
STEP 4
Reinstall Burner Tubes (reverse steps 5 and 6)
Note: The new burner tubes have an insect screen. The
old plastic insect screens are no longer needed.
3 burner
2 burner
(a)
(a)
(b)
(c)
Center Bracket
Old
New
1) Slide new burner tubes back through openings in
cookbox.
2) Insert Crossover
®
tube into the opening at the end of
outside burners (a).
If you have a 3rd burner slide the notched end into the
bracket on the Crossover
®
tube (b) Note:The single
row of gas portholes should be facing up.
3) Slide the burner assembly back under the guide screws
and washers (b) at the corners of the cooking box.
Do not tighten screws. The screws are only guides.