Filter
Top Products
3
STEP 5
Reinstall the Manifold and Valve Assembly and the
Control Panel.
Follow steps 1 through 3 in reverse order.
Check for gas leaks.
ƽ DANGER
Do not use an open flame to check for gas leaks. Be
sure there are no sparks or open flames in the area
while you check for leaks. Sparks or flames will result in
a fire or explosion which can cause serious bodily
injury or death, and damage to property.
1) Mix soap and water.
2) Turn on the gas supply.
3) Check for leaks by wetting the fitting with the soap and
water solution and watching for bubbles. If bubbles form,
or if a bubble grows, there is a leak.
If there is a leak, turn off the gas and tighten the fitting.
Turn the gas back on and recheck with the soap and
water solution.
STEP 6
LP Grills Check:
1) Hose-to-manifold connection.
2) Regulator-to-Cylinder connection.
ƽ WARNING: If there is a leak at connection (1),
retighten the fitting with a wrench and recheck for leaks
with soap and water solution.
If a leak persists after retightening the fitting, turn OFF
the gas. DO NOT OPERATE THE GRILL. Contact
Customer Service using the contact information sheet
provided with your manual(1-800-446-1071).
Check:
3) Valves-to-manifold connections.
4) The hose-to-regulator connection.
ƽ WARNING: If there is a leak at connections (2), (3) or
(4), turn OFF the gas. DO NOT OPERATE THE GRILL.
Contact Customer Service using the contact
information sheet provided with your manual(1-800-446-
1071).
When leak checks are complete, turn gas supply OFF at the
source and rinse connections with water.
If leak does not stop, contact Customer Service using the
contact information sheet provided with your manual(1-800-
446-1071). Do not use the barbecue.
5) When leak checking is complete, turn gas supply OFF at
the source and rinse connections with water.
(3)
(2)
(4)
*The grill illustrated may have slight
differences from the model purchased
(1)