Filter
Top Products
Command Function/Options
Dn Dials the specified phone number.
Can also include the following command options:
L Re-dials last number dialed
* P Pulse (Rotary) Dial Mode
R Originates call using answer (reverse)
frequencies.
Sn Dials phone number string stored in NVRAM
at position n (n = 0-3). Phone numbers are
stored with the &Zn=s command.
T Tone Dial Mode
, (Comma) Two Second Pause. Comma
pause duration can be redefined via the
S8 Register.
; (Semicolon) Return to Command mode
after dialing
“ Dials the letters that follow (in an
alphabetic phone number)
! (Exclamation point) Flashes the
switch hook
/ Delays for 125 msec before proceeding
with dial string
W Wait for second dial tone (X3 or higher).
Linked to S6 register
@ Dials, waits for 5 seconds of silence
after detecting ringbacks, and then
continues (X2 or X4).
$ Displays a list of dial commands.
En Sets local echo. See DIP Switch 4 (Section 4.2).
E0 Echo OFF
* E1 Modem displays keyboard commands
Fn Sets online local echo of transmitted data ON/OFF.
F0 Local echo ON. Modem sends a copy of
data it sends to the remote system to
your screen.
* F1 Local echo OFF. Receiving system may
send a remote echo of data it receives.
Hn Controls ON/OFF hook.
H0 Hangs up (goes on hook)
H1 Goes off hook
Page 8
RMM User’s Guide