Filter
Top Products
5-44
Basic Configuration
General Parameters:
• Administrator Mode: Permits/denies port access to Administrator and
SuperUser level accounts. When enabled (Permit), the port will be allowed to
invoke Administrator and SuperUser level commands, providing they are issued
by an account that permits them. If disabled (Deny), then accounts that permit
Administrator and SuperUser level commands will not be allowed to access
command mode via this port. (Default = Permit).
• Logoff Character: The Logoff Character determines the command(s) or
character(s) that must be issued at this port in order to disconnect. Note that the
Logoff Character does not apply to Direct Connections. (Default = ^X.)
• Sequence Disconnect: Enables/Disables and configures the disconnect
command. This item offers the option to disable the Sequence Disconnect, select a
one character format or a three character format. (Default = One Character.)
• Inactivity Timeout: Enables and selects the Timeout Period for this port. If
enabled, the Console Port will disconnect when no additional data activity is
detected for the duration of the timeout period. (Default = 5 Minutes.)
• Command Echo: Enables or Disables command echo at the Console Port. When
disabled, commands that are sent to the Console Port will still be invoked, but the
actual keystrokes will not be displayed on your monitor. (Default = On.)
• Accept Break: Determines whether the port will accept breaks received from the
attached device. When enabled, breaks received at the port will be passed to any
port that this port is connected to. When disabled, breaks will be refused at this
port. (Default = On.)