![](http://pdfasset.owneriq.net/e/54/e548fd50-3b09-4d7c-a7c4-0d792b9a91f6/e548fd50-3b09-4d7c-a7c4-0d792b9a91f6-bg72.png)
Take Apart Hard Drive - 42
3 Rotate the right side of
the hard drive bracket
over the left so that the
bracket is sitting upside
down to the left of the
computer.
4 Disconnect the hard
drive cable from the
logic board by carefully
pulling straight up on
hardened plastic back of
the cable connector.
5 Remove the 4 screws
holding the drive in the
bracket.
Hard Drive Cable Connector
Heat Sink Leaf Spring
Screw
Screw
Screw
Screw