Filter
Top Products
Ver. 1.5
4/1/2009 - 10 -
5. Enter the user name ‘ctek’ and password ‘ctek’
6. Click the Log In
button.
7. Click on the Activation button.
8. Click on the Over the Air Activation button
Figure 16
9. If Network Stability is Ok for Activation then go to step 9, if Not Ok, then wait 3
minutes. If still Not Ok, call support.
Figure 17
10. Click on the Activate button.
11. Wait 3 minutes, then click the Status button. If still in progress, then wait an
additional 3 minutes. If still in progress or ‘failed’, contact support.
12. When status changes to ‘Activated’ click the Back button.
13. Click on the Home button.
14. Click on the Interfaces-Wireless button and change the Wireless connection type
to ‘Enable’ (refer to fig. 17)