Filter
Top Products
5
Free-Roam Mode
Roboraptor
™
will start to explore his environment autonomously in Free-Roam
Mode if left alone for more than three minutes.
Caution: [Do not put him near the edge of a table since he could fall off
when he becomes animated.]
You can also put Roboraptor
™
into Free-Roam Mode manually by pressing “Shift”
and “Demo / Roam” .
While Roboraptor
™
is in Free-Roam Mode he will avoid obstacles using his
Infrared Vision Sensors. Occasionally he will stop moving to see if he can
hear any sharp, loud sounds. (See “Stereo sound sensors” on page 8)
If you trigger any of Roboraptor
™
’s touch sensors or press a button on the
controller, Roboraptor
™
will exit from Free-Roam Mode.
After 5 to 10 minutes of exploration Roboraptor
™
will power down. To wake
him up press the On/Off button twice.
Note: Shift will not stop Roboraptor™ from it’s Free-Roam Mode.
Guard Mode
Press “Shift” and “Bite / Guard” Mode to put Roboraptor
™
into Guard
Mode.
Roboraptor
™
will perform a head rotation to confirm that he is in Guard Mode.
In Guard Mode Roboraptor
™
is using his Infrared Vision Sensors and Stereo
Sound Sensors to guard the area immediately around him.
If he hears a sound or sees movement he will react with a roar and
become animated.
Occasionally Roboraptor
™
will turn his head and sniff.
After 30 minutes Roboraptor
™
will power down.
Caution: [Although Roboraptor
™
will not take any steps while he is in Guard
Mode, do
not put him near the edge of a table since he could fall
off when he becomes animated.]
Advanced Operation
%&.0
30".
4)*'5
4)*'5