Filter
Top Products
08905071B - 9 -
RC68+ (IR) COMMANDS
The RC68+ should be set to Group Code “C0”.
ZONE 1 ZONE 2 ZONE 3 ZONE 4
1
Zone Power Toggle 80 48 10 90
SRC 1 SRC 2 SRC 3 SRC 4
Zone 1 Source Select 00 C0 50 D0
Zone 2 Source Select 40 A0 30 B0
Zone 3 Source Select 20 E0 70 F0
2
Zone 4 Source Select 60 88 18 98
ZONE 1 ZONE 2 ZONE 3 ZONE 4
3
Zone Power On 08 A8 38 B8
4
Zone Power Off 28 E8 78 F8
5
Zone Power All Off 68
6
Zone Restore All C8
7
Zone Power All On 58
Note: For expanded systems, the ‘Primary’
HD44 should remain on the default group code
of “C0” but each additional HD44 will need to be
changed to a different discrete Code Group so
the units can be individually controlled. To
change the Group Code of the additional HD44’s
please see the RC68X instruction manual
(section labeled CHANGING THE INTERNAL
CODE GROUP NUMBER OF A XANTECH
MODEL) or the Application Advisory AA-09 on
the Xantech Web Site
[URL:
http://www.xantech.com/products/a_folder/a_aa
09.pdf