Xantrex Technology Powerpack 300 Power Supply User Manual


 
Using the Air Compressor
23
3. Turn the compressor off after appropriate pressure is
reached.
4. Open the thumb latch and remove the valve connector
from the valve stem.
5. Check air pressure with a pressure gauge.
Inflating Small Sports Equipment
You can use the compressor to inflate small sports equipment
such as soccer balls and footballs.
To inflate small sports equipment:
1. Place the valve connector fully on or into the valve
receptacle on the item. Go to Step 4.
OR
If necessary, use a supplied nozzle adaptor.
2. Choose the appropriate nozzle adaptor, insert the nozzle
adaptor into the valve stem and close the thumb latch.
3. Insert nozzle adaptor into the valve receptacle of the item.
4. Turn the compressor on and inflate to appropriate
pressure.
5. Turn the compressor off before removing nozzle adaptor
from valve stem.
Note: Leave the thumb latch in the open position for storing to
relieve pressure on the internal mechanisms.
CAUTION
The XPower Powerpack 300 cannot be used to inflate large
capacity inflatables such as float tubes, large air mattresses, and
inflatable boats. These types of products require extended inflating
times that may damage the compressor.
WARNING: Fire hazard
Allow the compressor to cool down for 10 minutes after each 10
minutes of continuous operation.