Filter
Top Products
Output Format
65
Covers
• Blank Covers - Adds a blank cover to the booklet.
• Front Cover - 2 Sided - Copies the first and last pages of the document onto the
cover stock. Add blank sheets to the set of documents if you want the inside front
and back covers to remain blank.
Paper Supply
Displays the [Booklet Creation - Covers - Paper Supply] screen. Select one of the
presets to specify [Main Body Tray] and [Cover Tray]. The paper loaded in the trays
selected for [Main Body Tray] and [Cover Tray] should be the same size and in
landscape orientation. For more information on the bypass tray, refer to
[Tray 5
(Bypass)] Screen on page 52
.
Depending on the trays installed on the machine, the name of this button may be
different.
[Booklet Creation - Divide Output] Screen
Allows you to subdivide a large booklet into many booklets.
Off
Disables the feature.
On
Subdivides the booklet into subsets.
Enter the number of sheets in each subset using the scroll buttons. You can also enter
the number by touching the text box and using the numeric keypad on the control panel.
[Booklet Creation - Fold & Staple] Screen
Allows you to fold and staple the booklet.
No Fold & Staple
Disables the Fold and Staple
features.
Fold Only
Makes a crease in each sheet of the booklet for easy folding.
Fold & Staple
Makes a crease in each sheet of the booklet for easy folding, and staples the sheets.
Covers
This feature allows you to add a front and/or back cover to a copy job.
NOTE: If the machine’s memory becomes full while scanning a document with this
feature enabled, follow the instructions on the screen to cancel the job. Delete the
stored documents, or reduce the amount of pages to free some memory and try again.
NOTE: This feature is unavailable when [Uncollated] or [With Separators] is selected
in [Copy Output].