Filter
Top Products
Programming the Machine
WorkCentre Pro 665/685/765/785 2-43
Redial Count and Interval Setting*
When a document is reserved in memory and a job number is
assigned, the machine automatically attempts to send the document
according to the redial setting.
Using this procedure, you can set the length of time between redial
attempts (Interval), and the number of times your machine redials a
number.
The redial interval range is from 1 to 15 minutes, and the number of
redials can be set between 0 and 14 attempts.
If the Resend Stored Fax feature is active and the machine exceeds
the number of redials, your document is retained in memory (see
Chapter 5, “Transmitting Documents”).
To change the Interval and Number of redials:
1. Press:
2. Select the Redial Mode you want to change:
To select Interval, press , then go to step 3.
To select Number of redials, press , then go to step 5.
* Not allowed in all markets.
*** Menu item numbers may vary according to configurations.
Menu
***
01. Interval
02. Number of redials