Filter
Top Products
Getting to Know Your Product
QuickStart Practice Guide 15
Activity 4: Making copies
The DocuColor 4 Copier/Printer allows you to select
the color mode to produce copies that are the best
quality.
See Figure 39. When the Original Type button is
pressed, the color mode display appears.
1. Color - Text/Phto: This is the default setting and
should be used when the original contains both text
and photographs in color.
2. Color - PrintPhto:- Use this setting when you
are copying printed photographs (catalogs, mag-
azines, etc.) in color.
3. Color - Phtograph: Use for copying developed
photographs or negative films (not printed pho-
tos) in color.
4. B/W - Text/Phto: This setting is for copying
black and white documents containing both text
and photographs.
5. B/W - Text: When the document being copied
only contains black and white text, this mode
should be used.
Making colored copies from the document glass
Note: Use the color test pattern supplied with the
DocuColor 4 Copier/Printer.
To make a single-sided copy from the document glass:
1. See Figure 40. Raise the document glass cover
or ADF.
2. Place the 8.5 x 11 in. colored original face down
and flush against the left rear corner of the docu-
ment glass.
3. Lower the document glass cover or ADF.
Choose, then press Select
Color - Text/Phto B/W - Text/Phto
Color - PrintPhto B/W - Text
Color - Phtograph
Figure 39
1
2
3
Figure 40