Filter
Top Products
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 10-3
10 Printing Model: Workstation to print server.
Overview:
You need to be a superuser to use the following procedures. Run the 49XX setup utility
to configure your Solaris 1.X / 2.X client to print to a remote 49XX printer. A remote print
spooler is a Solaris 1.X / 2.X workstation that has been configured to be a remote spooler
by the setup49XX configuration utility. SEE Chapter titled Printing Model: Print
Server to printer for this procedure. The 49XX remoter spooler spools jobs to a direct
connected or network connected 49XX printer.
Setup:
NOTE: The following instructions assume you have correctly completed the XPrint
49XX PostScript Print Tool installation.
1. Become superuser. Run the 49XX printer setup utility.
2. From the directory into which you installed the XPrint Print Tool software,
TYPE: /bin/setup49XX [ENTER]
NOTE: 49XX is model number for the printer model you are installing. For example, if
you are installing XPrint 4920, then the setup command would be setup4920