Filter
Top Products
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 15-3
Appendix C Setting up APPSOCKET
1. Press On Line on the Control Panel. Verify the LED to the left of the button is
OUT.
2. Press Menu . The ON-LINE message will disappear and TOP MENU should be
displayed.
3. Press Up+ until <COMMUNICATIONS> appears on the Display Panel and
then press Enter.
The APPSOCKET default settings are:
<APPSOCKET> = <ENABLE> = <YES>
<MODE>
= <AUTOSELECT>
The Mode options are not applicable for APPSOCKET. The setting should
always remain at AutoSelect.
To change the settings, follow these steps:
4. Press Up+ until <NETWORK SETUP> is displayed and then press Enter.
5. Press Up+ until <TCP/IP> is displayed and then press Enter.
6. Press Up+ until <APPSOCKET> is displayed and then press Enter.
7. Press Enter while <ENABLE> is displayed.
To enable APPSOCKET press Enter while <YES> is displayed.
To disable APPSOCKET press Up+ until <NO> is displayed and then press
Enter.
8. Press On Line . Verify the LED to the left of this button switches ON.
NOTE: