Filter
Top Products
PRODUCT DIFFERENCES/USER CONSIDERATIONS
Table 5-1. Will this 4050/4090 (V3.5) job print on my 4635
(V3A)?
Job features from
4050/4090 (V3.5) Results when run on 4635 (V3A)
Programmable bypass
transport
Job prints if 4635 LPS has a bypass
transport and the finishing device is
required by the job. Otherwise, it does
not run.
Clusters Job prints. Operator needs to redefine
clusters if trays differ.
Edgemarking Job prints.
Fonts Job prints if the fonts and character sets
used are loaded on the LPS or if
substitutions for these fonts are defined.
Graphics Job prints if sufficient graphic memory is
available.
Labels Job prints using only paper labels. Refer
to the Xerox 4635 LPS Operator Guide
for loading instructions.
Page density Job prints.
Paper sizes Job prints
Paper stock Job prints if it does not use edge
reinforced 3-hole stock.
Stitch commands No stitcher available on 4635 LPS,
therefore stitch commands are ignored
and job prints unstitched.
Transparencies Job prints.
XEROX 4635 LASER PRINTING SYSTEM PRODUCT REFERENCE 5-3