Filter
Top Products
AUDIT LOG RECORD FORMAT
Secondary codes
1 = data stream stock call out was overridden by
operator
2 = SIZING option caused report to abort
4 = RASTER
8 = more than 16 TL/DL blocks were used on one page
16 = CODE = NONE error was detected during printing
32 = set integrity problem
64 = graphic off leading edge of page
Key audit report calculations
This section provides additional information on how some
of the key fields shown are calculated.
Good sheets fed by source The number of good sheets fed from each tray is stored in
order in the good sheets fed array of the log header
record. Trays 1-7 correspond in order to words 1-7 of the
array.
Total good sheets fed The total number of good sheets fed is the sum of all of
the values in the good sheets fed array in the log header
record.
Good sheets delivered by destination The number of good sheets delivered to a particular
destination correspond to the values in words 1-6 in the
good sheets delivered array of the log header record as
follows: S = sample tray, A = bin A, B = bin B, C = bin
C, D = bin D, E = bypass transport.
Waste sheets fed by source The number of sheets fed from each tray is stored in order
in the waste sheets fed array in the log header record.
Trays 1-7 correspond in order to words 1-7 of the array.
Total waste sheets fed The total number of waste sheets fed is the sum of all of
the values in the waste sheets fed array of the log header
record.
Waste sheets delivered by destination The number of waste sheets delivered corresponds to the
values in words 1 and 7 (sample tray and purge tray) in the
waste sheets delivered array of the of the log header
record. The sheets removed value is obtained by
subtracting the sum of words 1 and 7 from the total waste
sheets fed value.
A-10 XEROX 4635 LPS PRODUCT REFERENCE