Filter
Top Products
dc09cc0453
Customer Support Page 19
Feature Implementation Values
thick2 side2[B] = Extra HW (X-HW) B
Reload
thick2 side2[C] = Extra HW (X-HW) C
Reload
thick2 side2[S] = Extra HW (X-HW) S
Reload
Media Type <</MediaType (string)>>
setpagedevice
Where string is any value or null*.
(MediaType will not affect tray selection.)
Media
Selection
<</DeferredMediaSelection
value>>
setpagedevice
Where value is one of the following:
true = Deferred media selection by output
device (more powerful and flexible
media selection)*
false = Immediate media selection by
strict setpagedevice operator
To select the appropriate media when
using MediaClass / Staple / Punch feature,
value must be set to true intentionally in the
beginning of header.
Print Mode <</HWResolution [x y]
/DeviceRenderingInfo << /Type
26 /ValuesPerColorComponent
int1 >>
>>
setpagedevice
Where combination of x, y and int1 is one
of the following:
x y int1 = …
600 600 2 = 600x600dpi 1bit/color
600 600 256 = 600x600dpi 8bits/color
1200 1200 2 = 1200x1200dpi 1bit/color
Duplex <</Duplex value>>
setpagedevice
Where value is one of the following:
true = Duplex
false = Simplex*
Tumble <</Tumble value>>
setpagedevice
This feature is effective only in conjunction
with that Duplex is true
Where value is one of the following:
true = Tumble (Short edge binding
Duplex)
false = Duplex (Long edge binding
Duplex)*
Image
Enhancement
<</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /REValue int >>
>>
setpagedevice
Where int is one of the following:
0 = No image enhancement
1 = Activate image enhancement*
Toner Save <</PostRenderingEnhance true
/PostRenderingEnhanceDetails
<< /Type 32 /TonerSaver int >>
>>
setpagedevice
Where int is one of the following:
0 = No toner saving*
1 = Lighten output density, toner saving