Filter
Top Products
Feature Implementation Values
Media
Source
@PJL SET MEDIASOURCE
= value
Where value is one of the following:
TRAY1: Feed from paper tray1
TRAY2: Tray2
TRAY3: Tray3
TRAY4: Tray4
TRAY5: Tray5 (Bypass)
<ESC>&l int H Where int is one of the following:
0: Feed paper from default tray
4: Tray1
1: Tray2
5: Tray3
8: Tray4
20 = Auto
2 or 3 = Tray5 (Bypass)
Output
Location
@PJL SET OUTBIN = value Where value is one of the following:
UPPER: Center Tray
MAINTRAY: Center Tray
CENTERTRAY: Center Tray
MAINTRAY2: Center Tray - Upper
LOWER: Left Top Tray (Face Up)
SIDETRAY: Left Top Tray (Face Up)
MAINTRAY3: Right Top Tray (w/ B-Finisher
or C-Finisher)
OUTBIN101: Finisher Tray (w/ A-Finisher or
B-Finisher or C-Finisher)
BOOKLETTRAY: Right Bottom
Tray(Booklet Maker) (w/
C-Finisher and booklet
module)
<ESC>&l int G Where int is one of the following:
0: Automatic Selection
1: Center Tray
2: Left Top Tray (Face Up)
4: Center Tray - Upper
6: Finisher tray (w/ finisher)
Stapling @PJL SET STAPLE = value Where value is one of the following:
TOPDUAL
TOPLEFT
TOPRIGHT
BOTTOMDUAL
BOTTOMLEFT
BOTTOMRIGHT
LEFTDUAL
RIGHTDUAL
SADDLE
NONE
dc09cc0453
Customer Support Page 5