Filter
Top Products
PRINTERS
3-4 XEROX DOCUPRINT 96/4635/180 NPS SYSTEM OVERVIEW GUIDE
Printer control console The printer control console is the color monitor located on top of the
printer. It contains message areas and graphic displays that alert you
to paper jams and other fault conditions, such as low toner. The
printer control console also contains buttons that allow you to control
certain functions of the printer, such as continuing an interrupted job,
without returning to the Printer Controller.
The printer control console has the following features:
• Local controls and displays for jam clearance, paper loading/
unloading, and diagnostics/service (used by the service
representative). Two types of messages are displayed on the
printer control console: fault messages, which relate to printer
malfunctions, and information messages, which relate to printer
conditions such as low dry ink.
• Touch-sensitive areas that allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
• Printer alarm consisting of three beeps, repeated for ten
seconds. The alarm is generated by any event that stops the
printer.
The alarm stops after three cycles or as soon as you start to clear the
fault condition (for example, when you open doors or covers
specified in the clearance instructions). You can stop the alarm by
pressing one of the printer control console buttons or by selecting a
function through the touch screen.
Figure 3-3. Printer control console
1 Language icon
2 Printer icon
3 Fault List icon
4 Tools icon
5 Guarded Tools icon (not available on the 96 NPS)
6 Clear button
7 Continue button
8 Stop button
Ready
Printer Options
11
12
12345
6
7
8910
Clear