Filter
Top Products
Intro
Install
Print
Copy
Scan
Maint
Help
53
Enhanced Capabilities Port
If your PC came with a default setting of LPT=ECP
Enhanced Capabilities Port), then the HomeCentre will not
operate. The port must be set to Standard Printer Port, not
ECP Port. To change to Standard Printer Port from ECP
Port, follow these instructions (depending on the version of
Windows 95 that is installed on your PC, the wording could
differ slightly):
1. Click on the Start Button; then choose the Settings/
Control Panel.
2. Double click the System icon; select the Device
Manager tab.
3. Click the + (plus sign) to the left of the Ports icon, then
double click on ECP Port.
4. Select the Driver tab in the Printer Port Properties
screen, then click the Change Driver button at the
bottom right of the screen.
5. The Select Device screen next comes up; click the
option button titled Show All Devices at the bottom
left of the screen. Two display boxes appear:
Manufacturers and Models. Select Printer Port from
the list on the right, then click OK