Filter
Top Products
Page 9-30 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Machine Administration
Billing Counters
Billing can display the contents of a number of counters used in the WorkCentre M20i. These
counters are:
- Total Impressions - the total number of prints produced by the machine.
- Toner Impressions - the number of prints produced by the toner.
- Drum Impressions - the number of prints produced by the drum.
- DADF Scan Page - the number of originals scanned from the Document Feeder.
- Platen Scan Page - the number of originals scanned from the Document Glass.
- Replaced Toner - the number of prints since the toner was last replaced.
- Replaced Drum - the number of prints since the drum was last replaced.
1
¾ Press the [Machine Status] key.
2
¾ Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
¾ If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Select [Billing] and press [Enter].
¾ Select the required Counter and
press [Enter].
System Admin Tools
[Billing]