Filter
Top Products
DocuPrint P1202 User Guide
1-21
ENGLISH
Printer Certifications
Laser Safety
The Xerox DocuPrint P1202 complies with laser product performance standards set by governmental,
national and international agencies as a Class 1 Laser Product. It does not emit hazardous radiation, as
the beam is totally enclosed during all phases of customer operation and maintenance.
The use of controls, adjustments, or procedure other than those specified in the documentation might
result in hazardous exposure to laser light.
The laser beam inside the printer is completely confined within the protective housings and external
covers. The radiation emitted cannot escape from the machine during any phase of user operation.
The Xerox DocuPrint P1202 contains laser danger labels. These labels are intended for use by Xerox
Service Representatives, and are placed on or near panels or shields that require special tools for
removal. Do not remove any of these panels. There are no operator serviceable areas inside these covers.
Laser Safety for the United States and Canada
The Xerox DocuPrint P1202 complies with safety standards, and is certified as a Class 1 Laser product
under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard
according to the Radiation Control for Health and Safety Act of 1968. The printer does not emit hazardous
laser radiation.
The use of controls, adjustments, or procedures other than those specified in the documentation might
result in hazardous exposure to laser light.
Since radiation emitted inside the printer is completely confined within the protective housings and
external covers, the laser beam cannot escape from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products of August 1, 1976. These regulations apply to laser products
marketed in the United States. The label on the machine indicates compliance with the CDRH regulations
and must be attached to laser products marketed in the United States.
The Xerox DocuPrint P1202 contains laser danger labels. These labels are intended for use by Xerox
Service Representatives, and are placed on or near panels or shields that require special tools for
removal. Do not remove any of these panels or shields. There are no operator serviceable areas inside
these covers.
Laser Safety for Finland and Sweden
Luokitus on on tehty standardin EN 60825 mukaisesti Klassningen är gjord I enlighet met standarden EN
60825.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
VAROITUS!
Laitteen käyttaminene muulla kuin tässä käyttöohjessa mainitulla tavalla saattaa alitstaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteiylle.
VARNING!
Om Apparaten används på annat sätt än I denna bruksanvisning specficeratas, kan användaren utsättas
för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Laser Statement (Laserturvallisuus)
Never operate and service the printer with the protective cover removed from laser/scanner assembly.
The reflected beam, although invisible, can damage your eyes.
Class 1 laser product
Luokan 1 laserlaite
Klass 1 laswer apparat
Allonpituus 770-795 nm
Teho 0.40mw +/-0.04 mw