Filter
Top Products
I
NTRODUCTION
1.
6
Understanding the Control Panel
On Line/Error( ) and Toner
Save( ) LEDs
LED Description
If the lights green, the printer is ready to print.
If the lights red, the printer is experiencing an error,
such as jammed paper, the open cover or the empty toner
cartridge. See “Troubleshooting Error Messages” on page
6.18.
If you press the button while the printer is receiving
data, the
LED blinks red to cancel printing.
In Manual Feed mode, if there is no paper in the Manual
Feeder, the LED blinks red. Load paper into the Manual
Feeder and the LED stops blinking.
If the printer is receiving data, the LED slowly blinks
green.
If the printer is printing the received data, the LED
blinks green fast.
If you press the button in Ready mode, this LED is on
and the Toner Save mode is enabled.
If you press this button once again, this LED is off and the
Toner Save mode is disabled.