Filter
Top Products
Common Problems
Xerox
®
Phaser
®
3052/3260
User Guide
142
Dropouts If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective. Try reprinting the job.
• The moisture content of the paper is uneven or the paper has moist spots on its
surface. Try a different brand of paper. (See Media Guidelines.)
• The paper lot is damaged. The manufacturing processes can cause some areas to
reject toner. Try a new ream or brand of paper.
• Change the printer option and try again. Go to Printing Preferences, select Paper
tab, and set type to Thick. (See Paper Options.)
• If these steps do not correct the problem, contact a service representative.
White Spots If white spots appear on the page:
• The paper is too rough and dirt from the paper falls to the inner areas of the
machine on to the transfer roller. Clean the inside of your machine. (See Cleaning
the Machine.).
• The paper path may need cleaning. Clean your machine. (See Cleaning the
Machine.) If these steps do not correct the problem, contact a service representative.
Vertical lines If black vertical streaks appear on the page, the surface of the drum cartridge inside the
machine has probably been scratched.
• Remove the drum cartridge and install a new one. (See Replacing the Drum
Cartridge.)
If white vertical streaks appear on the page, the inside of the machine may be dirty.
• Clean the inside of your machine. (See Cleaning the Machine.)
If these steps do not correct the problem, contact a service representative.
Dark Background If the amount of background shading becomes unacceptable:
• Change to a lighter weight paper. (See Media Specifications.)
• Check the environmental conditions: very dry conditions or a high level of humidity
(higher than 80% RH) can increase the amount of background shading.
• Remove the old toner cartridge and install a new one. (See Replacing the Toner
Cartridge.)
Toner smear If toner smears on the page:
• Clean the inside of the machine. (See Cleaning the Machine.)
• Check the paper type and quality. (See Media Guidelines.)
• Remove the toner cartridge and install a new one. (See Replacing the Toner
Cartridge.)
Condition Suggested Solutions
AaBbC
AaBbC
AaBbC
AaBbC
AaBbC