Filter
Top Products
Powering On the Machine
Xerox® WorkCentre® 3215/3225
User Guide
9
Powering Off the Machine
There are two ways to power the machine off:
•Press the Power button.
•Press the Power Save button, and use the Up/Down arrows to select Power Down and then OK.
Using the Keypad
As you perform various tasks, you may need to enter names and numbers. For example, when you set
up your machine, you enter your name or your company’s name, and the fax number. When you store
fax numbers or e-mail addresses in memory, you may also enter the corresponding names.
1. When you are prompted to enter a letter, locate the button labeled with the character you want.
Press the button until the correct letter appears on the display.
• For example, to enter the letter O, press 6, labeled with MNO.
• Each time you press 6, the display shows a different letter, M, N, O, m, n, o and finally 6.
2. You can enter special characters, such as @ / . & + -
. Refer to Keypad Characters.
3. To enter additional letters, repeat step 1. If the next letter is
printed on the same button wait 2 seconds between presses, or
move the cursor by pressing the down arrow and then press the
button again. The cursor will move to the right and the next
letter will appear on the display.
If you make a mistake while entering a number or name, press
the up arrow to delete the last digit or character. Then enter
the correct number or character.
4. When you have finished entering all characters, press OK.