Filter
Top Products
Preparing the CRW-F1SX Drive
13
*
The SCSI ID number “7” is normally reserved for the SCSI card.
• In the case that other SCSI device has been already connected to the computer, be
sure that the CRW-F1SX drive’s SCSI ID number is different from others. The
CRW-F1SX drive’s SCSI ID number is set at “1” by default.
• Set the dip switch completely upward/downward.
SCSI ID
SW 1
(ID SELECT: 1)
SW 2
(ID SELECT: 2)
SW 3
(ID SELECT: 4)
0
1 (default) ON
2ON
3ONON
4ON
5ON ON
6ONON
7 ON ON ON
Note
SCSI ID 0 SCSI ID 1
(default)
SCSI ID 2 SCSI ID 3
SCSI ID 4 SCSI ID 5 SCSI ID 6 (SCSI ID 7)
*
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON