Filter
Top Products
14
➁
➁➁
➁
Termination
A terminator prevents the reflection of SCSI signals at the ends of a SCSI chain.
The terminators of the devices at the end of the SCSI chain are required to be set
to ON. If the CRW-F1SX drive is not at the end of the SCSI chain, the
TERMINATOR (SW 4) of the dip switch is required to be set to OFF.
The TERMINATOR (SW 4) of the dip switch is set at ON by default.
Note
Computer
External SCSI Device
CRW-F1SX
SCSI card
(terminated)
(Termination ON) (Termination OFF)
Termination ON (default) Termination OFF
Set to ON if the CRW-F1SX drive
is at the end of the SCSI chain
Set to OFF if the CRW-F1SX drive
is not at the end of the SCSI chain
OFF
ON
OFF
ON