Filter
Top Products
41
*1: When ASPECT in the INITIAL menu is set to DEFAULT, and SCREEN ASPECT in the SETUP menu is set to 16:9.
*2: When ASPECT in the INITIAL menu is set to DEFAULT, and SCREEN ASPECT in the SETUP menu is set to 4:3.
*3: Available with RGB-CS (4 line) sources from SCART terminal.
*4: Same resolution as the DEFAUL mode depending on the each SCREEN ASPECT.
Important
• This projector can recognize 1280 × 768 pixels as the maximum resolution, however, it is programmed to recognize 1280 ×
720 or 1024 × 768 pixels as the normal resolution depending on the screen aspect.
• If the resolution and frequency of your computer are not shown on the table, find the compatible resolution and frequency by
changing the resolution of your computer.
• In the case of XGA, the right side of the image may not appear. In this case, adjust TRACKING in the SIGNAL menu.
• TV60 and TV50 are equivalent to 480i and 576i respectively. When these signals are input to the VIDEO or S-VIDEO signal,
the signal mode is indicated as TV60 or TV50. When they are input to the COMPONENT terminal, the signal mode is
indicated as 480i or 576i.
• This projector cannot be connected to other equipment via an RGB-CS (4 line) connection.
Connectors
SERIAL (8-pin) D-SUB (Mini D-SUB 15-pin) HDMI (HDMI - 19 pin)
◆ Dimension drawings
Pin No. Name I / O
1TXDIN
2––
3––
4 GND –
5––
6––
7 RXD OUT
8––
1
35
2
68
Pin No. Spec. Pin No. Spec.
1 R(RED) / CR 9 –
2 G(GREEN) / Y 10 GND
3 B(BLUE) / CB 11 GND
4 GND 12 DDC Data
5 GND 13 HD/CS
6 GND 14 VD
7 GND 15 DDC Clock
8 GND
15
11
6
10
15
Pin No. Spec. Pin No. Spec.
1 TMDS Data2+ 11 TMDS Clock
Shield
2TMDS Data2
Shield
12 TMDS Clock-
3 TMDS Data2- 13 -
4 TMDS Data1+ 14 -
5TMDS Data1
Shield
15 SCL
6 TMDS Data1- 16 SDA
7 TMDS Data0+ 17 DDCGround
8 TMDS Data02
Shield
18 +5 V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
191
2
18
290
69
360
102
2
(Unit: mm)